Generate a new I/O table in ladder

[Tony]

 I would like to send them a preconfigured ETN021 board and let them plug it in on the PLC. The only problem is I have to regenerate a new I/O table for that installation, so I have to go on-site.

In the future I want to prepare our machines in software to be able to have an extra comms card connected onto the board. Does anybody knows if it is possible to generate a new I/O table in ladder.

[tryplc]

Try to load manual here  http://www.tryplc.com/Download/PLC%20Manual/PLC_Omron/CJ1G_H-CPU_H%20OperationManual.html  and  see in 8-2  W393 CJ Operations manual